Installation Guide
Install Your Metal Tap
in Six Simple Steps
A handcrafted copper dispenser deserves a perfect setup. No special tools required — just care and a few minutes.
Hardware
Know Your Parts
Ensure your dispenser is completely empty and dry before you begin.
Rose gold spigot with curved spout and paddle lever handle.
White rubber rings — one for each side of the wall. Create the watertight seal.
Decorative disc flange — sits against the outside wall for a polished exterior.
Chrome disc flange — secures the assembly from the inside of the dispenser.
Stainless steel hex nut that threads onto the inner shank to lock everything in place.
Empty and dry before installation. Pre-drilled hole near the base accepts the tap.
Guide
Installation Steps
Follow the sequence carefully for a perfect, leak-free seal on the first try.
Decide which finish you want visible on the outside — Rose Gold or Silver. Slide your chosen cover onto the threaded end of the tap so the finished side faces outward.
Slide one white rubber washer onto the threads, pushing it snug against the outer cover. This creates the exterior watertight seal.
Carefully guide the threaded end of the tap through the pre-drilled hole near the base of your copper dispenser. Hold it straight and flush against the outside wall.
Reach inside the dispenser. Slide the second rubber washer onto the exposed threads so it sits flat against the inside wall. Then slide the remaining cover onto the threads, pressing it firmly against the washer.
Thread the stainless steel hex nut onto the end of the tap and turn clockwise until hand-tight against the inner cover. Keep the tap upright as you tighten.
Add just enough water to submerge the internal connection. Place a dry paper towel under the spout and wait 5–10 minutes. A dry towel means you're ready to go. A drip means empty the tank and tighten the inner nut a touch more.
Care & Maintenance
Looking After Your Tap
Simple habits that keep your copper fixture pristine for years.
- ◈Periodically check the inner nut's tightness, especially under heavy daily use.
- ◈Wipe down the tap with a soft, damp cloth to preserve the rose gold finish.
- ◈Avoid abrasive cleaners or steel wool — they scratch the decorative cover rings.
- ◈If you notice weeping around the covers, re-check and gently tighten the inner nut.